The
ML 700
When time hasn't been programmed, the "TIME" icon flashes. (Time settings on EL1000 and some EL2000 systems are not preserved in the event of power loss; time will have to be reprogrammed upon each power up.)
Setting the Time
Once the spa has been properly connected the first time (every power
up on the EL1000 and some EL2000 systems), notice
the "TIME" icon appearing on the screen.
Press "Time" then
"Mode/Prog"
Select the hour by pressing "Warm" or "Cool" (Each
press changes the time by 1 minute)
Press "Mode/Prog" to enter.
Select minutes by pressing "Warm" or "Cool" (Each press changes
the time by 1 minute)
Press "Mode/Prog" to exit the time setting
procedure and enter the optional filter cycle programming. (Exits
programming on some EL1000 and some EL2000 systems.)
Press "Time" to exit programming.
Continued . . . .
Overview:
The ML700 Controls have been installed on all models which use one main pump (which can include a circulation pump and a blower). The upgrade also includes the new GL series control Paks. This upgrade paves the way for our PC computer driven diagnostic system. It also will conform to standards for non-metal casings for electrical equipment. Together with our new line of Italian pumps built on a 50 cycle platform, our spas will easy surpass CE standards for 2007.
Hydro-Spa Models:
To be used on all single pump models using the Balboa GL series pack. The Lexxus (LX 74), The Tiara (2004).
Initial Start-Up:
When your spa is first actuated, it will go into Priming mode (after displaying some configuration information).
The priming mode will last up to 4 minutes and
then the spa will begin to heat and maintain the water temperature in
the Standard Mode. You can exit Priming Mode early by pressing
"Warm"
or "Cool".
HydroSpa Europe 830 East Morningside Drive Atlanta GA 30324 (01) 404 870 2109
Home | Models | Ex-Im Financing | Dealer Sign-Up | e-mail us | Dealers | Contact Us